$27.82
PLA+ is an environment-friendly material that is easy to print and has a smooth surface. Compared with ABS, PLA + has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size models; No pungent smell when printing, safe and environmental protection. Approved by FDA, it is safer to use; It can be used for conceptual models, rapid prototyping, and metal parts casting.
Printing parameters：
| Material name | ESUN ePLA + |
| Filament diameter | 1.75 mm |
| Recommended printing temperature (HOT end) |
200-230℃ |
| printing bed temperature | 45 – 80°C |
| Fan | 100% |
| Printing speed | 40-100 mm/s |
| Surface finish | Normal |
| Hole column fitting model
(The smaller the value, the better) |
0.3mm |
| Hanging model
(The larger the value, the better) |
<45° |
| Suspension bridge
(The larger the value, the better) |
|
